Cleaning And Care - Orbegozo MIG 2027 Manual De Instrucciones

MIG 2027
To cancel the child proof lock: Press STOP/CANCEL button for 3 seconds, then a beep will sound
and the indicator
light will off.
COOLING FEATURE
The electronically controlling system of the microwave oven has the feature of cooling. As for any
cooking mode which cooking time above 2 minutes, after finishing cooking, the oven fan will
work about 3 minutes automatically to cool the oven for prolonging the life of the oven.
AUTOMATIC PROTECTION
1. During all the cooking program, when the oven cavity temperature reaches a phenomenon
of 300°C, the screen displays error code E 01, and the oven automatically enters into self
protection mode with beeps until pressing the STOP/CANCEL button.
2. Error may also occur to the system sensor, short circuit will make the oven enter into
protection mode while the screen displaying E 03 with beeps until pressing the
STOP/CANCEL
Turn off the oven and remove the power plug from the wall socket before cleaning.
1.
Keep the inside of the oven clean. When food splatters or spilled liquids adhere to oven walls,
2.
wipe with a damp cloth. Mild detergent may be used if the oven gets very dirty. Avoid the use
of spray and other harsh cleaners as they may stain, streak or dull the door surface.
The outside surfaces should be cleaned with a damp cloth. To prevent damage to the
3.
operating parts inside the oven, water should not be allowed to seep into the ventilation
openings.
Wipe the door and window on both sides, the door seals and adjacent parts frequently with a
4.
damp cloth to remove any spills or spatters. Do not use abrasive cleaner.
Do not allow the control panel to become wet. Clean with a soft, damp cloth. When cleaning
5.
the control panel, leave oven door open to prevent oven from accidentally turning on.
If steam accumulates inside or around the outside of the oven door, wipe with a soft cloth.
6.
This may occur when the microwave oven is operated under high humidity condition. And it is
normal.
It is occasionally necessary to remove the glass tray for cleaning. Wash the tray in warm sudsy
7.
water or in a dishwasher.
The roller ring and oven floor should be cleaned regularly to avoid excessive noise. Simply
8.
wipe the bottom surface of the oven with mild detergent. The roller ring may be washed in
mild sudsy water or dishwasher. When removing the roller ring from cavity floor for cleaning,
be sure to replace in the proper position.
Remove odors from your oven by combining a cup of water with the juice and skin of one
9.
lemon in a deep microwaveable bowl, microwave for 5 minutes. Wipe thoroughly and dry
with a soft cloth.
MECHANISM
CLEANING AND CARE
button.