Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
USER GUIDE
Connecting using your wireless network password
If your router has not got a WPS button you will now be asked to enter your
wireless network password, or you can select SKIP WPS which also take you to
the password screen.
8. Press the
buttons on remote control to select each letter/number of your password.
Then press VOLUME/SELECT/SNOOZE dial on unit or SELECT button on
remote control to enter the selected letter/number.
9. When you have entered your password, press the
on the unit or press
OK on the right of the screen.
10. After your radio has connected, press the MENU button to exit the menu.
» Note:
Settings can be changed at any time in Menu-System Settings-Net-
work-Network wizard
GETTING STARTED
» This instruction manual explains the basic instruction for operating this
unit. Unless otherwise stated, all operations described are based on re-
mote control use.
Powering ON/OFF
1. Press the
button on the unit or remote control to switch the unit on.
2. Press the
standby on mode.
Selecting Modes
Press the MODE button on the unit or remote control to enter MODE menu. Then
press the
/
buttons on remote control to switch between different sources:
Internet Radio, Podcasts, DAB, FM and Bluetooth
LECT/SNOOZE dial on unit or SELECT button on remote to confirm selection.
» When the unit is idle for approximately 15 minutes in Internet radio,
Podcasts, DAB or Bluetooth
will automatically switch to Standby. To switch the unit off completely,
remove the mains plug from the main socket.
» Please turn the unit off completely to save energy when not in use.
/
/
/
/
/
button on the unit or remote control to switch the unit back to
/
buttons on the unit or press
/
buttons on the unit or press
/
/
buttons on remote control to select
mode (with external unit disconnected), it
®
40
/
/
/
/
buttons
/
/
/
/
. Press VOLUME/SE-
®
/
/
/
Publicidad
Tabla de contenido
