USER GUIDE
Software update
1. During System settings mode, press the
ware update and then press the SELECT button to confirm.
2. Press the
/
and then press the SELECT button to confirm.
» Before downloading software, ensure that the radio is plugged into a
stable mains power connection.
» Interrupting the mains supply during software download can lead to
functional disturbances and/or damage to the unit!
Setup wizard
The setup wizard is available in the System settings section; you can run through
this to configure settings for date/time and network. Once this has finished, your
radio is ready to use.
Info
1. During System settings mode, press the
then press the SELECT button to confirm.
2. The software version, Radio ID and Friendly name will show on the display.
Privacy policy
To see the Privacy policy page, press MENU to go to System settings -Privacy
policy. After Factory reset, you need to accept the Privacy policy again.
Backlight
1. During System settings mode, press the
Backlight and then press the SELECT button to confirm.
2. For the other settings under Backlight, press the
the following options and then press the SELECT button to confirm.
Timeout
Power-on level
Standby level
/
buttons to select „Auto-check setting" or „Check now",
On / 10 sec / 20 sec / 30 sec / 45 sec / 60 sec / 90
sec / 120 sec /180 sec
High / Medium / Low
Medium / Low
/
/
/
/
buttons to select Info and
/
44
buttons to select Soft-
/
buttons to select
/
/
buttons to select