Smeg CGF01WHEU Manual De Uso página 22

GRINDING TIMES (Fig. E-F)
The functions envision pre-set supply settings
of ground coffee. However, depending on
personal taste, the pre-set amount of ground
coffee can be increased or decreased, thus
customising the different functions.
Customise the amount of grinding
for espresso coffee
• Make sure that the grinding indicator (12)
is positioned at an adequate grinding level
for espresso coffee (FINE).
• Turn the knob (7) to "
• Press the START/STOP button (6) to start
grinding and hold it down for the desired
time; the lock nut (14) flashes during the
programming phase.
• On releasing the button, grinding stops, the
lock-nut stops flashing and the new setting
is memorised.
By modifying the amount of single
espresso coffee ground, the amount
of double espresso coffee is also
modified automatically.
Description/Use
".
1
Customising the amount of ground
coffee for American/French press
coffee
• Make sure that the grinding indicator (12) is
positioned at an adequate grinding level for
American/French press coffee (MEDIUM/
COARSE).
• Turn the knob (7) to "2".
• Press the START/STOP button (6) to start
grinding and hold it down for the desired
time; The lock nut (14) flashes during the
programming phase.
• On releasing the button, grinding stops, the
lock-nut stops flashing and the new setting
is saved.
By modifying the amount of
American/French press coffee
ground, for the 2-cup selection, the
amount of espresso coffee for the
other pre-set functions present on the
knob is modified automatically (from
2 to 12).
Resetting factory values
To reset the factory values:
• Turn the knob (7) onto program "12".
• Press the START/STOP button (6) and hold
it down for 5 seconds. The lock-nut (14)
flashes 5 times indicating that all factory-
set values have been reset (for Espresso
functions and Filter Coffee/French Press
functions).
EN - 7