Hama 00040982 Instrucciones De Uso página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Controls and Connections (Fig. 1)
1. Micro-USB port
2. "IR OUT" socket
3. HDMI output
4. HDMI input
5. Mode button
6. Power LED
7. Micro-USB port
8. "IR IN" socket
9. HDMI output
10. Mode button
11. Power LED
3. Package Contents
• 1 HDMI transmitter
• 1 HDMI receiver
• 1 IR emitter with 2.5 mm jack plug
• 1 IR receiver with 3.5 mm jack plug
• 2 power supply units
• 1 set of operating instructions
2
4. Safety Notes
• The product is intended for private, non-
commercial use only.
• The product is intended for indoor use only.
• Children should be supervised to ensure that they
do not play with the device.
• Do not use the product in areas where the use of
electronic devices is not permitted.
• Connect the product only to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
• Disconnect the product from the network using the
power button – if this is not available, unplug the
power cord from the socket.
• Lay all cables so that they do not pose a tripping
hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to
any major shocks.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
Warning
• Do not use the product if the AC adapter,
adapter cable or power cable is damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
• Do not open the device or continue to operate
it if it becomes damaged.

Publicidad

Tabla de contenido
loading

Tabla de contenido