Safety Instructions; Frequently Asked Questions - i-tec U3TRAVELDOCK Manual De Instrucciones

EN
Decompress the file on the desktop of your MacBook / PC as a virtual disc,
select "Drivers" and then „DisplayLink Software Installer". Then select the
language of the installation and follow the instructions on the screen. Enter
the user password if necessary.
The monitor may be flashing during the installation of the drivers – this
is a standard process. After the completion of the installation restart the
MacBook / PC.
Additionally, you need to enable DisplayLink drivers in the Security &
Privacy panel. For detailed instructions visit our website
www.i-tec.cz/en/setup-2/.
HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO
A MACBOOK / PC)
1) Turn ON the MacBook / PC.
2) Connect the USB 3.0 cable on the back panel of the docking station to a
free USB 3.0 / 2.0 port of your notebook / tablet / PC.
3) Subsequently, the automatic installation of the ports in the individual
systems will start.
4) After the completion of the installation restart the MacBook / PC.

SAFETY INSTRUCTIONS

• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – you will prevent it from slipping and
falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user
manual.

FREQUENTLY ASKED QUESTIONS

Available on our website www.i-tec.cz/en on the "FAQ" tab of this product.
8
Quick Start / USB 3.0 Travel Docking Station