Silvercrest SHDP 5.1 A1 Instrucciones De Uso página 90

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Image enlargement (Zoom)
Note:
This function may not be available on all DVDs! If you attempt to execute
a function that is not available, the symbol
screen.
During the playback of an inserted DVD/VCD/S-VCD you can enlarge the
image on the television screen in three levels. For this press the
on the remote control to set the following enlargement levels:
With the control buttons
suspended.
To switch off the enlargement function and return to the normal image
ZOOM
size press repeatedly the
button.
Change camera aspect (ANGLE)
Note:
This function may not be available on all DVDs! If you attempt to execute
a function that is not available, the symbol
screen.
Many films on DVD contain chapters which were recorded simultaneously
from various camera perspectives. With films that have such chapters
available you can view the same chapter from different perspectives.
ANGLE
For this press the
button on the remote control during playback of an
inserted DVD. Each press of the
available camera perspectives.
Superimpose/fade out subtitles
Note:
This function may not be available on all DVDs! If you attempt to execute
a function that is not available, the symbol
screen.
If the film on the inserted DVD has subtitles available you can superimpose
these on the television screen during playback by pressing the SUBTITLE button
on the remote control.
With the first press of the SUBTITLE button the subtitle of the first available
language will be superimposed on the television screen. With each further
press of the SUBTITLE button the subtitles of other available languages will be
superimposed successively on the television screen.
The number of the currently superimposed subtitle language will be superimposed
on the television screen ( i.e. 1/10 for the first of ten available subtitle languages).
When the last of the available subtitle languages is superimposed (i.e. 10/10
for the tenth of ten available subtitle languages) you can switch off the subtitle
SUBTITLE
function by pressing the
levision screen.
is displayed on the television
sections of the enlargement can be
is displayed on the television
ANGLE
button will switch to one of the
is displayed on the television
button again. OFF is superimposed on the te-
Change playback language
Note:
This function may not be available on all DVDs! If you attempt to execute a
function that is not available, the symbol
screen.
With many films on DVD you can, during playback, select another playback
ZOOM
button
language by pressing the
The first press of the
With each further press of the
one after the other, are switched on.
The currently switched on playback language will be superimposed on the
television screen.
Programmed playback (
Note:
This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt
to execute a function that is not available, the symbol
television screen.
With the "Programme" function you can put together your own film programme
in so far as you can select only certain chapters of an inserted DVD/VCD/S-VCD
for playback. In this way you can determine for yourself the sequence, in which
the chapters are played back. You can compile a maximum of 20 chapters
of a film for programmed play.
Press the
playback is stopped.
The Programme menu will be displayed on the television screen.
Programme window
First are listed the programme positions 1-10, programme position 1 is
highlighted.
1. With the number buttons enter the number of the title that is to be played
back first. The highlight changes to chapter entry (CH:).
2. With the number buttons enter the number of the chapter that is to be
played back. The highlighting moves to the programme position 2.
3. Select, with the navigation buttons
and enter title and chapter numbers for the programme positions.
• To display the next 10 programme positions select, with the navigation
buttons
You can allocate up to 20 programme positions.
• To delete entries in a programme position select the programme position
and press the
• To stop the programme function select the field EXIT and press the
button. All allocated programme positions are deleted.
4. You start playback of the programme positions by selecting the field
START and press the
- 88 -
is displayed on the television
AUDIO
button on the remote control.
AUDIO
button switches to the first available playback language.
AUDIO
button other available playback languages,
)
PROG
PROG
button on the remote control during playback or when
1
6
2
T T:
CH:
7
3
T T:
CH:
8
T T:
CH:
4
9
T T:
CH:
5
10
EXIT
, the field
and press the
ENTER
button.
ENTER
button.
is displayed on the
T T:
CH:
T T:
CH:
T T:
CH:
T T:
CH:
T T:
CH:
, further programme positions
ENTER
button.
ENTER

Publicidad

Tabla de contenido
loading

Tabla de contenido