En
3
/
MAIntEnAnCE :
thE thAnK
To avoid the system from getting dirty and getting blocked, it is recommended to clean the tank as soon
as some limestone or dirts appear.
1. Unplug the device.
2. Take off the clamp of the tube between the
bottom of the water tank and the first layer of
growing compartments.
3. Take all the growing compartments of the first
bottom layer and take off the tube
4. Lift the outside edge of the tank, and move the
tank out. Once cleaning is completed, please
reverse the operation and make sure that the tank
is installed correctly.
GROwInG COMPARtMEntS
Take the compartments off the shelves. After having cleaned them, put them back on the shelves
making sure to reposition the drippers at the top of each compartment (see below).
FROnt SIDE
Easy cleaning with soapy water.
10
Drippers