Malfunction Cases - JARDIBRIC home garden Manual De Instrucciones

4
/

MALFunCtIOn CASES :

If no operation on the water tank section
1. After having plugged the device, watch the control panel to check if the 'Batt' led blinks. If it does
not blink, check if there is some power.
2. After having plugged the device, if the 'Batt' led blinks but the watering does not work, check if
there is some water in the tank.
NB : The timer which is connected to a floater on its right side will only work correctly if the floater
is floating vertically. If the floater is floating horizontally, the timer will start and work for around 1
minute. Detecting that there is not enough water in the tank, it will automatically stop.
3. If the water does not come off the drippers :
a. There may be a leak in the circuit. Check if the tube is well connected between the first shelf
and the tank. Check the connections for each shelf. At last check if the circuit is well shut on the
last shelf.
b. Tubes can be obstructed by water dirts. Take the drippers of the tube and check if they are
obstructed or not. Clean them if necessary. At last, reposition them on the tube.
If the tank can not be taken off
The reason may be that the weels may be blocked. Before taking off the tank make sure that the weels
are not blocked.
WArninG
• The Home Garden is dedicated for private indoor or outdoor use. It is exclusively
designed to command a watering system.
• It musn't be used for industrial use or be in contact with chemical products,
inflammable or explosive materials.
• To be used only with clear and fresh water. Temperature should not exceed 50°C.
• Do not use abrasive nor corrosive products.
• Do not use high pressure cleaner
• Wintering : Frost may damage the Home Garden. During winters, it has to be placed
in a dry place away from frost.
Confide it to a point of collect or to an approved service center to be recycled.
lEt us paRticipatE in tHE EnviROnMEntal pROtEctiOn !
Your device contains numerous recoverable or recyclable materials.
En
11