Introduction And Machine Specifications - Clarke American Sanders CE7 Pro Edgers Manual Del Operador

Introduction and Machine Specifications

The models Ce and SE 7 were designed for floor sanding where larger machines are impratical or cannot reach.
They are suitable for rough and finish sanding on strip or parquet flooring. They can be used on a wide variety of
wood species including pine, oak, or maple. The added reach enables them to be used under obstructions or
toe-kick. Either model will accept 7" x 7/8" mounting hole or 7" hook and loop abrasive.
Part No.
Model
V
A
W
Hz
Cable
Vibration Exposure
Sound Emissions
Pad Speed
Abrasive (in/mm)
Air Flow (CFM)
Effective Reach
@ 3.5" Height (in/cm)
Dimensions (in/cm)
Weight (lbs./kg)
Weight (lbs./kg)
Dimensions (in/cm)
Clarke ® American Sanders
07170A
CE 7 PRO+
120
12
1.3 kW
60
25' 14-3
Grey Rubber
4.9 m/s 2
91 dB(A)
3640/3030 rpm
7/178 Hook & loop
or 7/8" Mounting hole
136
5.24/13.31
16.61x11.78x12.69 /
42.2x29.932.2
36.5 / 16.6
47.5 / 21.6
20x17.25x22.75 /
51x43.8x57.8
Operator's Manual (EN) - CE 7 Pro, SE7 Pro, CE7 Pro+, SE7 Pro+
07176A 07180A
SE 7 PRO + SE7 PRO
120 120
12 12
1.3 kW 1.3 kW
60 60
25' 14-3 NA
Grey Rubber
4.9 m/s 2 4.0 m/s
91 dB(A) 91 dB(A)
3640/3030 rpm 3640 rpm
7/178 Hook & loop 7/178 Hook & loop
or 7/8" Mounting hole or 7/8" Mounting hole or 7/8" Mounting hole
136 136
3.76/9.55 3.76/9.55
15.02x11.78x12.68 / 15.02x11.78x12.68 /
38.2x29.9x32.2 38.2x29.9x32.2
35.5 / 16.1 33.0 / 15.0
46.5 / 21.1 39.5 / 18.0
20x17.25x22.75 / 20x17.25x22.75 .
51x43.8x57.8 51x43.8x57.8
ENGLISH
EN
07175A
CE7 PRO
120
12
1.3 kW
60
NA
2 4.0 m/s 2
91 dB(A)
3640 rpm
7/178 Hook & loop
136
5.24/13.31
16.6x11.78x12.69 /
42.2x29.9x32.2
34.0 /15.5
40.5 / 18.4
20x17.25x22.75 /
51x43.8x57.8
- 5 -