Publicidad
Idiomas disponibles
Idiomas disponibles
The radio connection between the hob and the cooker hood
must be activated and the hob has to be fitted with the
Con|ctivity 2.0 Stick in order for the Con|ctivity function to
be used. Both appliances must be installed and operational.
You only need to carry out the signing on procedure once. If
the appliances are disconnected from the electricity supply,
during a power cut for example, they will still remain signed
on.
Important. To establish the radio connection, the cooker
hood and hob are activated at the same time. Start activa-
ting the cooker hood first, then the hob.
The Con|ctivity stick can be used with hobs which have the
< symbol in the upper left hand corner of the ceramic glass
(except KM 549 and KM 554).
The stick can be plugged directly into hobs which have the
Miele|home connection shown in the diagram. All other hobs
require an adapter which is available from Miele.
The position of the connection can be found in the operating
and installation instructions for the hob.
en
5
Publicidad
