Recording From A Keyboard - Edirol Audio Capture UA-20 24bit Digital Manual Del Usuario

UA-20 application guide

Recording from a keyboard

Here's how you can send a keyboard performance as audio data to your computer, and
record it on sequencer software.
fig.keyboard.e
Signal flow
Adjust the
input level.
Turn on if you
want to monitor.
Set this to
LINE.
Keyboard
OUTPUT
The sound that is input to Input jack L(MONO) will be recorded on the left channel, and
the sound that is input to R jack will be recorded on the right channel.
Use the Input volume to adjust the input level.
Check the input level on the application that you are using.
If you turn the input monitor switch to ON, the sound will be output from the
headphone jack and the master output jacks.
59