5 . SAFETY SEAT USE METHOD
Headrest
height adjuster
5.3. Install the Backrest and the Base.
1. Lay flat the backrest and the base.
2. Insert the hook of the backrest to the groove of the base.
3. Need to press strongly, make sure the both hook fully engaged..
4. Turn the backrest into a verti.
5.1. removing the fabric cover.
A) Headrest
1. Move the headrest of the child seat to the
upper position.
2. Take off the cover from belt holder of
headrest first, then remove the cover of the
headrest.
B) Take off the cover from backrest and base.
5.2. Adjust the headrest
Pull the headrest height adjuster and hea-
drest at same time, select the correct height of
the headrest and engage it in the position that
fits for your child by releasing the adjuster.
one
two
three
four
gancho
conectado
ranura
29
29
29
29