Frequently Asked Questions - i-tec CHARGER5P52WQC Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
i-tec USB Quick Charger 52W
• The Quick Charge 3.0 output is primarily intended to charge mobile phones,
which support Quick Charge technology, but it is also possible to charge
devices which do not support Quick Charge technology.
• Thanks to the use of a "smart" chip, the USB-A outputs are independent. It
doesn't matter to which port the device is connected. The Quick Charge output
is connected to an independent circuit.
• It is possible to charge two iPad tablets or two Samsung tablets at the same
time.
• We recommend using the original USB cables supplied with the device.
Otherwise, the device may not charge or will charge slowly.
• Example of use: 2x iPad with max. consumption 2.4A per port + 2x phone /
tablet with max. consumption 1A per port. The max. consumption is 6.8A
+ 1x Quick Charge phone with max. 3A consumption. The total maximum
consumption is 9.8A.
Important safety measures:
• Do not pull the power supply cable from the mains socket by pulling the cable.
• Do not connect to or pull the power cord from the socket with wet hands.
• Do not connect the adapter if it is damaged (e.g. short circuit, burnt PVC
case).
• Immediately disconnect the adapter from the mains socket should you
smell burning.
• Do not disassemble this device or make modifications, as this could case
a fire risk, injury or damage to personal property. Entrust all repairs to the
manufacturer, i-tec Technologies s.r.o..
• Do not expose the adapter to direct sunlight, place it on heating elements,
or on any other heat. Do not cover it with paper or any other material that could
influence air circulation.
• Do not use the adapter in an environment with a temperature below 0°C or
higher than 40°C. Use in ventilated areas only.
• Do not place the adapter on heat-sensitive surfaces.
• Do not use the adapter with damaged supply cord, cable or fuses.
• Keep away from children.
• Ensure the output voltage of the power adapter is suitable for your device.
• Disconnect the device from mains power if you do not use it for a prolonged
period of time.
WARRANTY
A standard 24-month warranty is provided on this product. The warranty is
void if the device is:
• exposed to liquid
• damaged by shock, fall, or by any other mechanical damage
• placed near fire
• visibly damaged by any unauthorized modification or improper handling
• has damaged cables

FREQUENTLY ASKED QUESTIONS

Available on our website www.i-tec.cz/en/ on the "FAQ" tab of this product.
6 |
ENGLISH
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido