6.3.4.
Charging the Battery
The battery is charged using the mains adapter. When the mains adapter is con-
nected and switched on, the battery charges automatically regardless of whether or
not the Notebook is switched on or not. A complete charge takes a few hours with
the Notebook switched off. With the Notebook switched on, the charging process
takes significantly longer.
PLEASE NOTE!
The charging process is interrupted if the battery voltage or temperature
gets too high.
6.3.5.
Discharging the Battery
Operate the Notebook on battery power until it turns itself off due to low battery
charge.
PLEASE NOTE!
Be sure to save your open files promptly to prevent any data loss.
6.3.6.
Battery Performance
The actual operating time varies depending on the configuration of the power-sav-
ing functions. You can configure these to suit your requirements in the Control Pa-
nel under System and Security, Power Options. Note: your Notebook consumes
more power when running certain applications, e.g. when playing a DVD.
6.3.7.
Checking the Battery Charge
To check the current battery charge status, move the cursor over the power icon in
the task bar. In battery mode, the icon is displayed as a battery.
You can obtain more information about settings by double-clicking the icon.
PLEASE NOTE!
If you ignore the low battery warning, your Notebook will shut down.
22 of 72