Intended Use; Ec Declaration Of Conformity - Makita DCU180 Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Dimensions
(L x W x H)
Traveling speed
Minimum turning radius
Maximum climbing capacity
Maximum load capacity
Brake
Tire
Rated voltage
Standard battery cartridge
Charger
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Only for EU countries
Ni-MH
Li-ion Do not dispose of electric equipment
or battery pack together with house-
hold waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste Batteries
and Accumulators and their imple-
mentation in accordance with national
laws, electric equipment and batteries
and battery pack(s) that have reached
the end of their life must be collected
separately and returned to an environ-
mentally compatible recycling facility.
Fully pull down the lever and check
that the carrier or bucket is locked.
Do not change the direction on steep
slopes.
When carrier is installed
When bucket is installed
Forward
Reverse
Front wheel
Rear wheel
Front wheel
Rear wheel
When carrier is installed
When bucket is installed
During operation: 1,560 mm x 1,060 mm x 900 mm
When stored: 1,110 mm x 670 mm x 820 mm
During operation: 1,310 mm x 790 mm x 900 mm
When stored: 1,110 mm x 590 mm x 820 mm
1,075 mm (Outer diameter when turning with front wheel as axis)
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
DC18RC / DC18RD / DC18SD / DC18SE / DC18SF

Intended use

The machine is intended for loading and carrying
objects.

EC Declaration of Conformity

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
13 ENGLISH
DCU180
1.5 or 3.5 km/h
1.0 km/h
12°
130 kg
Disc brake with wire
Fixed with pedal
Tubeless tire
Self-sealing tire
D.C. 18 V
45 kg
39 - 40 kg
Load and unload objects on flat
ground.
Load objects on the carrier or bucket
evenly.
This machine cannot be used on the
public road.
Do not use for transporting persons.
Do not expose to rain.
To cancel the beep sound, release
the switch trigger and pull the brake
lever.