Seasoning The Cooking Surfaces - Buffalo L501 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)
Operation
Handle
Counter balance
handle
Power indicator
light
Power switch

Seasoning the Cooking Surfaces

The cooking plate surfaces need to be 'seasoned' before using for the first time.
Ensure the cooking surfaces are clean.
1.
Brush the surfaces with cooking oil.
2.
Set the thermostat(s) to 110°C and turn the appliance On. The power indicator light turns on.
3.
Once the appliance reaches temperature the power indicator light turns off.
4.
Turn the appliance Off and allow the to cool before wiping away any excess oil.
5.
The appliance is now ready to use.
6.
Cooking
Close the plates.
1.
Note: It may be necessary to slightly grease the plates with cooking oil before cooking
depending on the foodstuff.
Set the thermostat(s) to the desired temperature (60°C-300°C) and turn the appliance On. The power
2.
indicator light(s) turn on.
Note: 200°C to 220°C is suitable for general cooking.
The power indicator light(s) turn Off when the appliance has reached the set temperature.
3.
Lift the top plate and place the foodstuff on the bottom plate.
4.
Lower the top plate.
5.
Note: All BUFFALO Contact Grills feature counter-balanced top plates that allow for even
cooking.
UK
Top plate
Bottom plate
Waste Tray
Digital Timer
Thermostat
2