Coupling The Hands-Free Appliance With Several Mobile Telephones - Silvercrest SBTF 10 B2 Instrucciones De Uso

Note:
When using the latest mobile phones, (Smartphones) those
that are equipped with Bluetooth 2.0 or a more modern
version, it is possible that the pass code "9999" need not
be entered. If the coupling is not completed within 2 min-
utes, the hands-free appliance switches itself off . The LED
status display 6 extinguishes and you will hear a long
and deep signal tone. With some mobile telephones it is
GB
possible that coupling does not automatically take place.
MT
In this case coupling must be carried out additionally on
the mobile telephone. The LED status display 6 blinks
twice every 3 seconds until this has been carried out. Fur-
ther information can be found in your mobile telephone's
operating instructions.
Coupling the hands-free appliance
with several mobile telephones
You can couple the hands-free appliance with up to eight
mobile telephones. However, it can only be connected
with one mobiletelephone. If a further mobile telephone
is coupled with the hands-free appliance, the coupling in-
formation of the fi rst coupled mobile telephone is erased.
When the hands-free appliance is switched on, within a
few seconds it attempts to make a connection to the last
used mobile phone. Should a connection not be possible,
the hands-free appliance nonetheless remains recognis-
able for other mobile telephones. To use the hands-free
appliance with a linked mobile phone that is not the last
used mobile phone, the connection must be made via the
Bluetooth
54
®
menu of the mobile phone.
SBTF 10 B2