Velleman CAMSCC18 Manual Del Usuario página 5

4. Features
• built-in microphone
• with built-in auto electronic shutter
• special functions via On screen display (OSD) set-up menu: privacy masking /
video mirror function
• no lens included
5. Overview
Refer to the drawings on page 2 of this manual.
• [1] Flange adjustment ring, suitable for CS-mount lenses.
• [2] Back focal lock screw. The camera is set at the standard back focal position.
Depending on the type of used lens, slight adjustment may be necessary. Adjust
the lens back-focus by turning the focusing knob. Use the included socket head
wrench for this.
• [3] Auto iris lens connector. Supply power and control signals to the auto iris
lens.
• [4] Power LED indicator, is on during normal operation.
• [5] DC12V input. Connect a regulated 12VDC power supply (not incl.) to
provide power to the camera.
• [6] Video output connector to connect the camera to a monitor (not incl.)
• [7] Iris VD/DD selector. Set to Video Drive (VD) when using a video drive auto
iris lens, or to Direct Drive (DD) in case a direct drive auto iris lens is used.
• [8] Audio output connector. Connect the audio in of the monitor to this
connector.
• [9] Menu selection
Menu (2 screens):
LENS
SHUTTER/AGC
WHITE BAL
BACKLIGHT
PICT ADJUST
ATR
NEXT
EXIT
Select NEXT to go to the next screen.
02/03/2011
CAMSCC18
If you want to ...
Enter the camera configuration menu
Move to the sub-menu you want
Change setting
Enter the configuration page of an
option
MANUAL
AUTO
ANTI CR
OFF
OFF
SAVE ALL
5
Press ...
(Enter)
/ (up/down)
(left/right)
/
(Enter)
©Velleman
®
nv