Velleman CAMCOLVC1GB Manual Del Usuario página 4

4. Installation
1. Install the bracket
4. Connect the video output jack to the
monitor
5. Description (fig. 1)
1. Function switch
• NTSC / PAL
The two most common video standards used are NTSC and PAL. NTSC is the video system or standard used
in North America and most of South America. PAL is the predominant video system or standard mostly used
in Europe. Please select and switch to the system that suits your location.
• Full stop / Overwrite
To select whether to overwrite the recorded memories or to stop recording when memory is full. Selecting
"Overwrite" will overwrite the memory, starting with the oldest data first. Selecting "Full Stop" will cause the
RECORD MODE to stop. The REC LED will be unlit.
2. Video output jack
To enable monitoring functions, connect one terminal to the video output
jack and the other terminal to the TV or monitor.
3. Power switch
Select "ON" to switch on the device, select "OFF" to switch it off.
4. Power source jack
5. LED operation mode indicator
The LED light easily allows the user to distinguish the current system status.
6. Function button
Buttons commonly used are STOP and REC buttons.
7. LED power indicator
The LED lights up to indicate that the device is powered up. The LED goes out to indicate insufficient power or
that the device is switched off.
CAMCOLVC1GB
2. Mount the camera on the bracket
5. Switch on the device
4
3. Connect the adapter to the
power source jack or install
batteries
6. Point the camera at the target
Camera
VELLEMAN