Important; Introduction; Safety Instructions - Schulz PL800 Manual De Instrucciones

Congratulations for purchasing a Somar product, marketed by Schulz Compressores S.A.

IMPORTANT

TIONS must be observed to reduce the risks and prevent personal or material damage to your equipment.

2. INTRODUCTION

FOR THE CORRECT USE OF THE SCHULZ PRODUCT, WE RECOMMEND THOROUGH READING
AND COMPREHENSION OF THIS MANUAL.
• This Instruction Manual contains important information on use, installation, maintenance and safety, and
should always be available for the operator.
• If there is any problem that cannot be solved by the information provided in this manual, please contact the
nearest Schulz Authorized Dealer.
• To validate the warranty, the conditions presented in the TERM OF WARRANTY chapter must be observed.

3. SAFETY INSTRUCTIONS

1. The tool must not be used by children or people unfamiliar with its use;
2. Do not use the tool barefoot, in wet or very humid places, as this increases the risk of electric shock;
3. For protection against electric shock, it is recommended to install a residual current circuit breaker.
Consult an electrician to select and install this safety device;
4. To reduce the risks of electric shock, when using your tool, do not touch metal surfaces attached to the
ground or grounded, such as pipes, motors, gutters, fences, windows, doors, metal gates, etc;
5. Do not make splices in the cord. If required, ask for a power cord replacement at the nearest Schulz
Technical Assistance;
6. Do not use your tool while tired, under the influence of medication, alcohol or drugs. Lack of attention
during operation may result in serious personal injury;
7. Always use suitable personal protective equipment (PPE), such as dust glasses and masks, non-skid
safety shoes and ear protection. This reduces the risks against personal injury;
8. Apparel and long hair: Do not wear clothing or jewelry that may come into contact with the moving
part of the tool during use. If you have long hair, contain it before using the tool;
9. Hazardous area, explosive atmosphere: do not use your electric tool in explosive atmospheres (gas,
flammable liquid or dust). The motor has brushes that generate sparks that may cause explosion;
When using this product, basic safety precautions described in the SAFETY INSTRUC-
26
ENGLISH