Miele WRG 02 Instrucciones De Montaje página 34

34 von 73
Quantity Mat. no. Designation
4 Stainless-steel washer, B 5.3
1 Bend, 70 x 87 PP
1 Sleeve, DIN 19560 DN 70
1 Bend, 70 x 87 PP
2 Pipe, DIN 19560 HTEM 70 x 150
1 Branch piece, DIN 19560 70 x 70 x 87
1 Pipe, DIN 19560 HTEM 70 x 150
1 Bend, 70 x 87 PP
1 Bracket
1 MDB drain valve
1 Drain valve wiring harness
2 4.2 x 13 screw
2 Stainless-steel nut, B4.2
1 Overflow
1 Drain set
1 Bend, DIN 19560, 40 x 87
1 Pipe, 173 x 40
2 Bend, 70 x 87 PP
1 Branch piece, 70 50 x 87, DIN 19560
1 Connection stub
1 Collar, DIN 4060, HGTM 40/50 C
1 Branch piece
1 Ring
1 Connection stub
2 Hose clips, SGL 70-90
1 Branch piece, 70 50 x 87, DIN 19560
1 Pipe, DIN 19560, 50 x 40
1 Bend, 70 x 87 PP
8 Hose, 1 1/4" 32 x 5.5
1 Water recycling wiring harness
1 6-pin terminal strip
1 Sticker, 1-6, 10x68
2 3.5 x 11 screw
1 Installation accessory
1 Initial kit for water recycling
1 WRG 02 hose sub-assembly
Danger due to incorrectly carried out service and repair work
WARNING
Danger due to incorrectly carried out service and repair work.
There is a risk of serious damage, injury and even death if service and repair work is carried out incorrectly.
A
Service and repair work should only be carried out by a suitably qualified electrician with specialist training,
knowledge and experience.
A
All appropriate safety regulations must be taken into account.
A
Read the technical service documentation (TSD) before starting service work.
07.06.2018 Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
M.-Nr. 04598535