Functions List; Functions Diagram - Ecler MPAGE4 Manual De Instrucciones

NOTE: Remember that on the MIMO54, when the EVAC working mode is active for
input number 5 (Evacuation/Emergency), the ZONE destination zone selector and the zones
selected for the MPAGE4 Unit are disabled. In this working mode, the signal from the PAGING
programme and warnings in ALL of the unit's zone outputs are muted and replaced by the signal
in input 5 or the evacuation/emergency message.

5. FUNCTIONS LIST

1. PAGE key
2. PAGE indicator
3. Zone keys
4. ALL key
5. Goose-neck microphone
6. CHIME selector
7. R-45 connector, PAGER
8. Adjust level of the CHIME carillon melody signal
9. Adjust MIC microphone signal gain

6. FUNCTIONS DIAGRAM

6
CHIME
5
3
4
2
1
7
PAGER
MIC
9
CHIME
8
7