ForaCare GD40 Manual Del Usuario página 36

cleaning and disinfection cycles or the warranty period, which ever
comes first.
Stop using the meter if you see any signs of deterioration. For ex-
ample:
• meter cannot be turned on,
• LCD display cracks or becomes cloudy,
• buttons no longer function,
• meter outer casing cracks,
• data can not be transmitted to PC,
• color or paint/printing on housing is abnormal, or
• scratches or abrasions on meter are higher than acceptable.
Please contact the customer service for a replacement meter if any of
the signs of deterioration are noticed.
• Do NOT clean and disinfect the meter while performing tests.
• If the meter is being operated by a second person, the meter and lancing
device should be decontaminated prior to use by the second person.
• Do NOT allow cleaning and disinfecting solution to get in the test slot, bat-
tery compartment, or strip-ejection button.
• If you do get moisture in the test strip slot, wipe it away with a corner of tis-
sue.
• Always dry the meter thoroughly before using it
• Do not spray the meter directly with cleaning solutions especially those
containing water (i.e. soapy water), as this could cause the solution to enter
the case inside and damage the electronic components or circuitry
36
NOTE