Piezas De Desgaste - ESAB Aristo RoboFeed 3004w Instrucciones De Uso

RoboFeed 3004w

Piezas de desgaste

Item Ordering no.
HI 1 0455 072 002 Intermediate nozzle
0456 615 001 Intermediate nozzle
HI 2 0469 837 880 Outlet nozzle
0469 837 881 Outlet nozzle
HI 3 0191 496 114 Key
HI 4 0215 701 007 Locking washer
HI 5a 0459 440 001 Motor gear euro, drive gear
Item Ordering no.
HI 5b 0459 052 001 Feed/pressure rollers
0459 052 002 Feed/pressure rollers
0459 052 003 Feed/pressure rollers
0459 052 013 Feed/pressure rollers
0458 825 001 Feed/pressure rollers
0458 825 002 Feed/pressure rollers
0458 825 003 Feed/pressure rollers
0458 824 001 Feed/pressure rollers
0458 824 002 Feed/pressure rollers
0458 824 003 Feed/pressure rollers
0458 874 002 Feed/pressure rollers
The rollers are marked with wire dimension in mm, some are also marked with inch.
Item Ordering no.
HI 6 Washer
HI 7 Screw
HI 8 Screw
HI 9 Washer
HI 10 0469 838 001 Cover
HI 11 0458 722 880 Axle and Nut
HI 12 0459 441 880 Gear adapter
HI 12 0455 053 881 Gear adapter
HI 13 0455 049 001 Inlet nozzle
HI 14 0458 999 001 Shaft
HI 15 F102 440 880 Quick connector
Welding with aluminium wire
In order to weld with aluminium wire, proper rollers, nozzles and liners for aluminium wire MUST be
used, It is recommended to use 3 m long welding gun for aluminium wire, equipped with appropriate
wear parts.
cm51vw
Denomination
Fe, Ss & cored
Al
Fe, Ss & cored
Al
Denomination Wire type
Fe, Ss & cored
Fe, Ss & cored
Fe, Ss & cored
Fe, Ss & cored
Cored
Cored
Cored
Al
Al
Al
Al
Use only pressure and feed rollers marked A2, R2 or S2.
Denomination
Ø 16/5x1
M4x12
M6x12
Ø 16/8.4x1.5
Heavy duty with needle bearing
Ø 3mm for 0.6-1.6mm Fe, Ss, Al and cored wire
For Marathon Pac
Wire type Wire dimensions
Ø 2.0 mm steel for 0.6-1.6 mm
Ø 2.0 mm plastic for 0.8-1.6 mm
Wire dimensions
Ø 0.6 & 0.8 mm
Ø 0.8 & 1,0 mm
Ø 0.9/1.0 & 1.2 mm
Ø 1.4 & 1.6 mm
Ø 0.9/1.0 & 1.2 mm
Ø 1.2 & 1.4 mm
Ø 1.6 mm
Ø 0.8 & 0.9/1.0 mm
Ø 1.0 & 1.2 mm
Ø 1.2 & 1.6 mm
Ø 1.0 & 1.2 mm
Notes
TM
- 18 -
Groove Roller
typ markings
V 0.6 S2 & 0.8 S2
V
0.8 S2 & 1.0 S2
V 1.0 S2 & 1.2 S2
V 1.4 S2 & 1.6 S2
V-Knurled 1.0 R2 & 1.2 R2
V-Knurled 1.2 R2 & 1.4 R2
V-Knurled 1.6 R2 & 2.0 R2
U 0.8 A2 & 1.0 A2
U 1.0 A2 & 1.2 A2
U 1.2 A2 & 1.6 A2
U 1.0 A2 & 1.2 A2
© ESAB AB 2008