Batteries - Loc8tor Lite Manual Del Usuario

Loc8tor Handheld:
If the Loc8tor does not power up or lights are faint
replace the battery using 1 x CR2032 or equivalent
placing in the battery compartment + side up. Battery
compartment can be found on the back at the bottom.
Slide down to open.
To change the battery in a Tag:
Remove rubber band going around Tag. Use the flat
tool included, or small screwdriver, and insert into small
space on the side of the tag opposite where the lanyard
hole is. Twist flat tool and tag will pop open.
• Replace battery with
new CR2032 battery,
keeping the plus side
face up.
• Replace the lid
by lining up the
lanyard hole and
pressing shut.
• If the battery is
correctly inserted
the Tag will beep.
10

BATTERIES

www.loc8tor.co.uk