Miele professional PG 8597 Instrucciones De Manejo página 11

How the Aqua-Soft-System works
The Aqua-Soft-System PG 8597 is a
"two-bed" system which supplies a
constant supply of softened water.
It is a dual-tank system. One tank
supplies softened water whilst the other
reactivates.
Reactivation is controlled by quantity
and is automatically set in motion by
the requirement for softened water.
The use of salt is kept to a minimum
because reactivation is on demand.
This appliance does not require
electricity, solenoid valve or timer to
operate.
Moving components only come into
contact with softened water so
limescale does not develop.
The Aqua-Soft-System PG 8597 must
be fitted with the correct water
hardness range disk (Meter Disk) for
the water supply. A total of 8 different
disks are supplied.
The Miele service technician will install
the correct hardness range disk (Meter
Disk) to set the degree of hardness.
en - Description of the appliance
Minimum flow pressure
The Aqua-Soft-System operates with a
minimum flow pressure of approx.
250 kPa (2.5 bar) when used in
conjunction with either a fresh water
machine or a tank machine which does
not have a built-in water softener.
Water pressure must not drop below
250 kPa (2.5 bar) even when at full
flow.
11