Ip Assignment By Pppoe; Figure 19 In Case Of Selecting 2 Or More Servers For Dhcp Ip Assignment - FlexWATCH FW-3850 Manual De Usuario

FlexWATCH User Manual Part 2

Figure 19 In case of selecting 2 or more servers for DHCP IP Assignment

TIP) In case of multiple DHCP settings, you can't set IP address, Netmask, Gateway, DNS1, 2.
Please refer to Static Manual IP Assignment.
4.
Check out if your DHCP setup is correctly applied; please connect FlexWATCH to
VDSL or Cable Modem. If your server is under Local network, please connect
FlexWATCH to a HUB in Local Network.

2.3.4. IP Assignment by PPPoE

1.
Connect your PC and FlexWATCH server in the network. Setup a static IP address
according to the steps in chapter '2.3.2. Static IP Assignment'.
2.
After IP setup, check out if you can access to the homepage of FlexWATCH server by
clicking "Connect" icon.
TIP) Please enable AOIP option in Admin menu if you want to have FlexWATCH server to be
accessible by remote users.
3.
Run FlexWATCH Installer again, and select FlexWATCH on the search list, Click IP
Setup button and specify PPPoE option.
M4028 19 Seyeon Tech Co., Ltd