Customer Responsibilities; General Recommendations; Lubrication Diagram - Craftsman 917.387241 Manual Del Propietário

CUSTOMER RESPONSIBILITIES
MAIN NANCESC.EOO'E
F.,, ,.o. s
AS YOU COMPLETE ;_' _ _',_ _"
ERVICE DATES
Check for Lecse Fasteners I_ k#'
Clean/in,' Dect Grass Catcher
(If Equipl _1) V'
M clean LaweMower t_'
O Clean Under Drive Cover (Power-Propelled Mowers)
Check dr_ be./p_L_/s
RE(Power-Propelled Mowers) t/
Chack/Sharpan/Replace Blade _:=
LubdcaffoctChart I_
Clean Battery/Recharge
IElectrin Start Mowers1 I_ I/4
E
Check Encjine Oil Level
N
Change Engine Oil 11/1_
;G
Clean Air Filter I_ =
I Inspect Muffler _'
N cleanorReplace S park Plug
v'
E Replece A irF'dter Peper C artridge
II/2
1 - Change more c410nwhen opemin9 und_ s heaw Iced or Jnhigh anV_n_ temperatunm.
2 - Servk:o more often when o1_ in okty ordusty conditk_s.
3 -Replece t)_les rnom m'lm when mowing in undy _1.
4 - CMrge 48 hours at end o_ see.5_.
GENERAL RECOMMENDATIONS LUBRICATION DIAGRAM
The warranty on this lawn mower does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain mower as instructed in this
manual.
Some adjustments will need to be made
periodically to propedy maintain your unit.
All adjustments in the Service and Adjust-
ments section of this manual should be
checked at least once each season.
• Once a year, replace the spark plug,
clean or replace air filter element and
check blade for wear. A new spark plug
and clean/new air filter element assures
proper air-fuel mixture and helps your
engine run better and last longer.
• Follow the maintenance schedule in this
manual.
BEFORE EACH USE
• Check engine oil level.
• Check for loose fasteners.
LUBRICATION
Keep unit well lubricated.
(_) Wheel
(_) Brake Spring
Bracket
(_) MulcherDoor
_) EngineOil Hinge
(_) Spray Lubricant
(_ Refer to Maintenance "Engine"Section.
IMPORTANT Do not oil or grease plastic
wheel bearings. Viscous lubricants will
attract dust and dirt that will shorten the life
of the self lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant sparingly.
9