Dmx-512 Connection / Connection Between Devices - Futurelight PRH-Digital Manual Del Usuario

(1) Omega-holders
(2) Clamp
(3) Safety-rope
(4) Quick-lock fastener
Screw one clamp each via a M12 screw and nut onto the Omega-
clamps.
Insert the quick-lock fasteners of the first Omega-clamp into the respective holes on the bottom of the
device. Tighten the quick-lock fasteners fully clockwise. Install the second Omega-clamp.

DMX-512 connection / connection between devices

The load must always be installed in the centre of gravity!
CAUTION!
37/90 00029992.DOC, Version 1.3