7. MAIN COMPONENTS
6
7
1. Front handle
2. Safety switch
3. Switch trigger
4. Rear handle
5. Protection device
6. Clamp of the extension
8. OPERATION
Connecting to power suply (Figure 8.1):
To avoid the extension cord from being pulled loose while using, follow the instructions below:
1.
Bend the extension cord 8 and pass it through hole 7; then fi t it in clamp of extension 6;
2.
Slowly pull loop against clamp of extension until the slack is removed;
3.
Plug product into extension cord.
10
8
FIGURE 8.1
2
1
5
9
7. Hole
8. Extension cord
9. Blade
10. Electric cable
FIGURE 8.2
26
4
10
3
7
6