Orbegozo CM 8000 Manual De Instrucciones página 17

CM 8000
Step 4: Drill the holes in the marks with a drill (not included) and insert the fastening plugs into the holes,
checking that the edge is flush with the wall.
Step 5: fix the wall bracket to it with the 3 40mm screws.
Step 6: fix the lower brackets to the bottom of the device using the 8 mm screws.
Step 7: Lift the appliance (if necessary with the help of another person) and carefully hang it on the wall
bracket making sure that the upper rear edge of the fireplace fits with the wall bracket and is centered.
Step 8: Mark the position on the wall for the lower supports (placed on the device). Carefully remove the
appliance from the wall and drill the holes following step 4.
17