Orbegozo CM 8000 Manual De Instrucciones página 19

CM 8000
ECO MODE
Step 1: Press the mode button until the Eco sign appears on the digital display.
Step 2: use the + or - buttons to select the desired temperature, this is between 7-32ºC.
Note: In this function the device will turn off automatically when the room temperature reaches the
selected temperature, in this mode the temperature is always 3ºC lower than in comfort mode.
ANTI-FREEZE MODE
Press the mode button until the anti-freeze symbol appears on the digital display.
Note: the temperature in this mode is set at 7 ° C and cannot be changed.
CONFIGURATION OF THE AUTOMATIC CONTROL MODE
Step 1: Press the mode button until P1 appears on the digital display.
Step 2: In P1 mode, press the setting button to edit the operation every hour.
Step 3: the schedule will start to flash. Press the mode button to change the setting (hourly) to any Comfort,
Eco or Anti-freeze mode.
Step 4: Press the + button to move to the next time or press - to go to the previous time.
Step 5: once all the selected schedules are selected, press the adjust button to confirm them.
CONFIGURATION OF THE AUTOMATIC CONTROL MODE
P2 mode has two groups of schedules:
3. Monday, Tuesday, Wednesday, Thursday, Friday (Monday, Tuesday, Wednesday, Thursday, Friday).
4. Saturday, Sunday (Saturday, Sunday).
Step 1: Press the mode button until the P2 symbol appears on the digital display.
Step 2: In P2 mode, press the set button to edit the operating hours from Monday to Friday.
Step 3: The schedule will start to flash. Press the mode button to change the setting (hourly) to any Comfort,
Eco or Anti-freeze mode.
Step 4: Press the + button for the next hour or the - button for the previous hour.
Step 5: once all the selected schedules are selected, press the adjust button to confirm them. It will change
to Saturday-Sunday time setting.
Step 6: Repeat steps 1-4 to set the Saturday-Sunday schedule and press the set button to confirm the P2
programming.
SETTING THE P3 AUTOMATIC CONTROL MODE
Different schedules and temperature can be selected for each day of the week (7 schedules).
Step 1: Press the mode button until the P3 symbol appears on the digital display.
Step 2: In P3 mode, press the setting button to edit the operation for each hour on Monday.
Step 3: the schedule will flash. Press the mode button to change the setting (hourly) to any Comfort, Eco or
Anti-freeze mode.
Step 4: Press the + button for the next hour or the - button for the previous hour.
Step 5: once all the selected schedules are selected, press the adjust button to confirm them. It will change
to the Tuesday schedule setting.
Step 6: Repeat steps 1-4 to set the schedule for each of the seven days and press the set button to confirm
the P3 programming.
CONFIGURATION OF THE CURRENT TIME
Step 1: press and hold the adjust button for 3 seconds.
Step 2: The current time will flash. Press + or - to select the correct time. Press the set button to confirm.
19