System Requirements; Installation; Attach The Wall Plate To The Wall - StarTech ARMPIVWALL Guia Del Usuario

System requirements

• Phillips screwdriver
System requirements are subject to change. For the latest requirements, please visit
www.StarTech.com/ARMPIVWALL.

Installation

Warning! Make sure that the weight of the monitor doesn't exceed the weight
capacity of this product. If you exceed the weight capacity, you might experience
personal injury or damage to the product. This product can support the
following weight: 4.4 lb. (2 kg) to 19.8 lb. (9 kg).

Attach the wall plate to the wall

Warning! Wall structures vary, and it's important to make sure that the type
of wall structure and mounting hardware that you're using will properly support
the mounted equipment. Failure to do so may result in personal injury and/or
equipment damage. The wall structure should be capable of supporting at least
four times the weight of the mounted equipment.
Warning! The mounting hardware included with this product might not be
adequate for some wall structures. If you lack the necessary expertise to attach
this product to the wall structure that you're using, contact a construction
professional to install the wall mount or to provide specific mounting
instructions for your wall structure.
1. Use a pencil to mark the location on the wall where you want to attach the wall
plate.
Tip! Use the built-in level on the wall plate to make sure that the wall plate is level.
2. Follow the appropriate steps for the type of wall that you're attaching the mount to
and attach the wall plate to the wall.
Instruction manual
5