Publicidad
Idiomas disponibles
Idiomas disponibles
Winding the chronograph
Wind your Hanhart chronograph by hand
before wearing it for the first time or after the
movement has not run for a long period.
The crown is now in position "I". Rotate the
crown through approximately 40 revolutions in
a clockwise direction to wind the watch fully.
The watch is protected against overwinding.
Please stop winding when you feel resistance.
The movement of your Hanhart chronograph is
wound automatically by the movements of your
wrist and has a power reserve. When you take
off your Hanhart chronograph (e.g. overnight)
you do not have to rewind it every time.
6
Setting the time
1. Set the crown in position "II" or "III". The
movement is stopped with the crown in this
position. To synchronize your chronograph
with an accurate time source (e.g. a radio-
controlled clock), stop the watch when the
seconds hand is at "60".
2. Set the watch to the desired time of day
by rotating the hands in an anticlockwise
direction.
3. To restart the movement, push the crown
back into position "I".
Do not forget to push back the crown into
position "I" again once you have completed
the adjustments. The water-resistance of your
chronograph can only be guaranteed when the
crown is at this position.
Setting the date
1. Set the crown in position "II". Rotate the
crown in the clockwise direction until the
7
Publicidad
