Fcc Compliance Statement - DSC Escort Manual De Instruccion

FCC COMPLIANCE STATEMENT

CAUTION:Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your
authority to use this equipment.
This equipment generates and uses radio frequency energy and if not installed and used properly, in strict
accordance with the manufacturer's instructions, may cause interference to radio and television reception. It has
been type tested and found to comply with the limits for Class B device in accordance with the specifications in
Subpart "B" of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interfer-
ence in any residential installation. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to television or radio reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Re-orient the receiving antenna
I
Relocate the alarm control with respect to the receiver
I
Move the alarm control away from the receiver
I
Connect the alarm control into a different outlet so that alarm control and receiver are on different circuits.
I
If necessary, the user should consult the dealer or an experienced radio/television technician for additional
suggestions. The user may find the following booklet prepared by the FCC helpful: "How to Identify and Resolve
Radio/Television Interference Problems." This booklet is available from the U.S. Government Printing Office,
Washington, D.C. 20402, Stock # 004-000-00345-4.
IMPORTANT INFORMATION
NOTIFICATION TO TELEPHONE COMPANY Upon request, the customer shall notify the telephone company
of the particular line which the connection will be made, and provide FCC registration number and the ringer
equivalence of the protective circuit.
FCC Registration Number: F53CAN-75252-KX-N
Ringer Equivalence Number: 0.1B
MALFUNCTION OF THE EQUIPMENT In the event that this equipment should fail to operate properly, the
customer shall disconnect the equipment from the telephone line to determine if it is the customer's equipment which
is not working properly, or if the problem is with the telephone company network. If the problem is with this
equipment, the customer shall discontinue use until it is repaired.
TELEPHONE CONNECTION REQUIREMENTS Except for the telephone company provided ringers, all
connections to the telephone network shall be made through standard plugs and telephone company provided
jacks, or equivalent, in such a manner as to allow for easy, immediate disconnection of the terminal equipment.
Standard jacks shall be so arranged that, if the plug connected there is withdrawn, no interference to the operation
of the equipment at the customer's premises which remains connected to the telephone network shall occur by reason
of such withdrawal.
INCIDENCE OF HARM Should terminal equipment or protective circuitry cause harm to the telephone network,
the telephone company shall, where practicable, notify the customer that temporary disconnection of service may
be required; however, where prior notice is not practicable, the telephone company may temporary discontinue
service if such action is deemed reasonable in the circumstances. In the case of such temporary discontinuance, the
telephone company shall promptly notify the customer and will be given the opportunity to correct the situation.
The customer also has the right to bring a complaint to the FCC if he feels the disconnection is not warranted.
CHANGE IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES The Telephone Company may make
changes in its communications facilities, equipment, operations or procedures, where such actions is reasonably
required and proper in its business. Should any such changes render the customer's terminal equipment incompat-
ible with the telephone company facilities the customer shall be given adequate notice to the effect of the
modifications to maintain uninterrupted service.
GENERAL This equipment should not be used on coin telephone lines. Connection to party line service is subject
to state tariffs.
RINGER EQUIVALENCE NUMBER (REN) The REN is useful to determine the quantity of devices that you
may connect to your telephone line and still have all of those devices ring when your telephone number is called.
In most, but not all areas, the sum of the REN's of all devices connected to one line should not exceed five (5). To
be certain of the number of devices that you may connect to your line, you may want to contact your local
telephone company.
EQUIPMENT MAINTENANCE FACILITY
Digital Security Controls Ltd. 160 Washburn St.Lockport, NY 14094