Sears CRAFTSMAN 917.28861 Manual Del Operador página 9

TO iNSTALL MOWER
1. Set parking brake lever and lower
attachment lift lever
• Depress clutch/brake pedal all the way
down and hold.
Pull parking brake lever up and hold,
release pressure from clutch/brake pedal,
then release parking brake lever. Pedal
should remain in brake position. Ensure
parking brake will hold tractor secure.
Parkin( Brake Lever
_ILCAUTION: Lift lever is spring loaded.
Have a tight grip on lift lever, lower it slowly
and engage in lowest position. Lift lever is
located on left side of fender.
,
Assemble front gauge wheel (W) to
front of mower.
f_
H. Front Mower Bracket X. Shoulder Bolt
W. Front Gauge Wheel Y, 11/40.D. Washer
Z, 3/8-16 Locknut
3. Turn steering wheel left and position
mower,
• Turn steering wheel to the left as far as it
will go and position mower on right side of
tractor with deflector shield (Q) to the right.
Front
Transaxle
Q, Deflector
Shield
A. Mower Side Suspension Arms
B. Retainer Spring
C. Rear Lift Link(s)
D. Right Side Rear Mower Bracket
E. Front Lift Link Assembly
R Front Suspension Bracket
H, Front Mower Bracket
I,
K.
L.
M.
Q.
S.
W.
9
Left Side Rear Mower Bracket
Belt Tension Rod
Locking Bracket
Engine Clutch Pulley
Deflector Shield
Anti-Sway Bar
Front Gauge Wheel