Troubleshooting - Shinco 7000 BTU Manual De Usuario

Trouble-shooting
In case of any of the following faults, please contact professional maintenance personnel in a
timely manner.
TROUBLE
The A/C doesn't
work
The A/C starts
frequently
The air
conditioning is very
loud
The compressor
doesn't work
Notice: If the air conditioner is noticeable, turn off and unplug the power cord. Then contact
professional maintenance personnel.
The above technical parameters are subject to change without notice.
Meaning of crossed –out wheeled dustbin:
Do not dispose of electrical appliances unused in the household waste, but use separate
collection equipment.
For information on available collection systems, contact your local government. When disposing
of electrical appliances in landfills or dumps, dangerous substances can enter the groundwater.
As a result, they enter the food chain and damage your health and well-being.
When replacing old equipment with new equipment, the dealer is required by law to take back
your old equipment for disposal at least free of charge.
Information about the refrigerant.
The product or equipment contains fluorinated greenhouse gases. The type of refrigerant used is
R290: 150 g;
GWP: 3, carbon dioxide equivalent: 0.00045 t.
CAUSE
Not plug in
The display panel
displays "FL"
Time OFF function is started
Direct sunlight
Doors and windows keep
open; there are lots of people
or heat source in room
Filter screen is very dirty
Air inlet or air outlet is blocked
The A/C is placed unevenly
Its delay protection is started
SOLUTION
Plug in
Restart the A/C after power off
and draining, then it will
become normal
The A/C can be restarted 3
minutes after being turning
off.
Draw the curtain
Close doors and windows,
remove heat source
Clean or replace it
Remove the stem
Place it at even and firm
ground, avoid shaking
Wait for 3min., turn on it after
temperature decreases
9
EN