Clean And Maintenance; Drainage Method - Shinco 7000 BTU Manual De Usuario

Continuous cooling mode
• Press the "Continuous" button on the remote control to activate the
"Continuous Cool" mode in "Cool" mode.
• Continuous cooling mode, it is imperative to run the cooling mode
regardless of the temperature.
• In continuous cooling mode, the air conditioner blows at high speed.

Clean and Maintenance

Drainage Method

This product is equipped with an automatic water evaporation system.
The condenser is cooled by circulating condensed water to improve
cooling efficiency and save energy.
When the inner vessel is completely filled with water, the display shows "FL" and the
compressor automatically stops working. After switching off, unscrew the water cover, pull
out the wedge and drain the water. The function will be back to normal after the restart.
Maintenance
Notice:
To avoid electric shock, turn off the air conditioner and unplug the
power cord before performing any maintenance or repairs.
CLEANING
• Disconnect the power plug before cleaning.
• Wipe with a soft, half-dry cloth. Do not use strong chemicals such as benzene, alcohol,
gasoline, etc. Otherwise, the surface of the air conditioner and even the function of the
air conditioner may be damaged.
• Avoid spraying water on the air conditioner.
STRAINER
• Wash the filter every two weeks. The clogging by dust affects the efficiency of the air
conditioner.
• Remove the air inlet grille and pull out the filter screen on both sides in the direction
shown in the following illustrations.
EN
7