Technical Data - Husqvarna 124C Manual De Instrucciones

TECHNICAL DATA
Technical data
124C
Engine
Cylinder volume, cu.in./cm 3 1.7/28
Cylinder bore, inch/mm 1.4/35
Stroke, inch/mm 1.130/28.7
Idle speed, rpm 2,800-3,200
Recommended max. speed, rpm 11,000
Speed of output shaft, rpm 8,000
Max. engine output, acc. to ISO 8893, hp/kW 1.1/0.8
Catalytic converter muffler Yes
Speed-regulated ignition system No
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor Zama
Fuel tank capacity, US pint/liter 0.85/0.4
Weight
Weight without fuel, cutting attachment and guard, Ibs/kg 10/4.4
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear,
measured according to ANSI B175.3-1997, dB(A),
min/max: 94/97
Vibration levels
Vibration levels at handles, measured according to
ANSlB175.3-1997, m/s 2
At idle, left/right handles: 3/5
At max. speed, left/right handles: 9/8
Walbro/CD
Champion RCJ-6Y
0.024/0.6
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for
noise pressure levels under various working conditions with the following time distribution:
1/2 idle and 1/2 max. speed.
NOTE[ Noise pressure at the user's ear and vibration on the handles are measured with all
the machine's approved cutting equipment fitted. The table indicates the highest and lowest
values.
Model 1240 (3/8 RH arbor shaft thread)
Approved accessories Type
Trimmer head I T25
Cutting attachment guard, part. no.
537 33 83-03
545146961 Rev. 2 7/6/07 English-19