Turn On And Off; Function Selector - Mx Onda MX-PIP2195 Manual De Instrucciones

TURN ON AND OFF

1. Place the container in the cooking area, remember that this must be
suitable for induction and its base must be between 12 and 26 cm.
2. To turn the plate press button 1 (
buzzer will sound a "beep".
3. By the function selector 2 ( F ) select the desired mode, see the following
section.
4. To turn off the plate again press button 1 (
the buzzer will sound a "beep".
Note:
If you turn on the plate and do not select any function, automatically turns off
after about 30 seconds.

FUNCTION SELECTOR

By the function selector 2 ( F ) you can choose the mode of working in power
(200 W to 2000 W) at temperature (60 ° C to 240 ° C) or set the timer.
To select the operating mode in power or temperature follow the steps below to
adjust the timer, see the following section.
Power operating mode
1. With the plate turn on and a container in the cooking zone, press once the
button 2 ( F ) the display will show the power level and the default mode
LED power indicator 6 will turn on.
2. Tap the 4 () or 5 () button with your fingertip to increase or decrease
the power respectively. The display 3 will show the selected power.
3. Touch the button 10 (MAX) or 9 (MIN) with your fingertip to directly select
the maximum or minimum temperature of the plate.
4. At any time during cooking you can increase or decrease the temperature,
change the power mode or set the timer.
Temperature operating mode
1. With the plate on and a container in the cooking zone, press button 2 ( F )
three times, the display will show the default temperature level and the LED
indicator for temperature mode 5 will light up.
2. Touch the button 4 () or 5 () with your fingertip to increase or decrease
the temperature respectively. Screen 3 will show the selected temperature.
3. Touch the button 10 (MAX) or 9 (MIN) with your fingertip to directly select
the maximum or minimum temperature of the plate.
4. At any time during cooking you can increase or decrease the temperature,
change the power mode or set the timer.
), the display will show "ON " and the
) the display will turn off and
8