PNI House IP31 Manual De Usuario página 3

Connections
Note: To use the camera on wired network use the same next configuration steps without
the Wi-fi settings.
How to insert microSD card
PNI IP31 and IP32 cameras can record images locally on a microSD card. You
can buy this card separately and then insert it in the camera using the steps bellow:
4. Carefully place all the parts together again and with the screws.
Power input
Ethernet port: connect the camera to your
internet router
RESET button: press for 10sec, release button
then wait 30sec for the camera to restart itself
1. Open the 2 side screws and remove the frontal
part of the camera case
2. Carefully open the 2 little screws that bind the
electronic plates to the metallic case
3. Pull the electronic part from the case and insert
the microSD card in the designated slot
3
EN