Reversing The Door Swing - Micro fridge MHR-3 Manual Del Usuario

Reversing the Door
Swing
Left/right door opening method:
This product provides the reversing of the left/right door opening. You
can select your preference of door opening by following the procedure to
make the change.
Dismantling: (see fig. # 1 and fig. # 3)
1, Fix refrigerator and freezer door by sticking adhesive tape on both
sides to hold doors in place.
2, As shown in fig. 1, dismantle the hinge box cover on the upper part of
freezer door with a phillips head screwdriver. Then remove the three
screws from the hinge. Take out the hinge by pulling it vertically, and
keep it in a safe place.
3. Remove the adhesive tape on freezer door, lift and take the door down,
and carefully put it aside.
4, As shown in fig. 3, dismantle two screws of the central hinge, lift and
take down the central hinge and pad, and keep them in a safe place.
5, Remove the adhesive tape on refrigerator door, lift and take down
refrigerator door, and carefully put it aside,
fig, # 3
Central hinge pad
Central hinge axle