Operate In Conjunction With Tv Via Hdmi - JVC CU-VD50U Manual De Instrucciones

Operate in Conjunction with TV via
HDMI
Connecting this burner to an HDMI-CEC-enabled TV using the HDMI cable allows you
to utilize the following convenient functions.
• Connect an HDMI cable between this
Preparations
• Turn on the TV and set the HDMI-CEC
• Turn on this burner and set "CONTROL
Operation method 1
• Insert a disc.
(Press the PLAY or
NAVIGATION/TOP
MENU button if the
playback navigator does
not appear.)
Operation method 2
• This burner turns off
automatically.
• Some TV will turn on automatically and switch to the HDMI input just by
Note
turning on this burner.
• Depending on the TV connected, the onscreen display language of this
burner will automatically switched to the language that was being
selected for the TV when the burner is turned on.
(This is applicable only if this burner supports the language selected for
the TV.)
To use this burner using a language that differs from the onscreen
display language of the TV, set "CONTROL WITH HDMI" to "OFF".
• Malfunction may occur when devices such as amplifier and selector are
connected. Set "CONTROL WITH HDMI" to "OFF".
burner and the TV. (P. 12)
related setting in its menu to "on". (For
details, refer to the instruction manual of
the TV.)
WITH HDMI" under "CONNECTION
SETTING" in the settings menu to "ON".
(P. 34, 37)
HDMI cable (not provided)
CONNECTION SETTING
MONITOR TYPE
COMPONENT OUTPUT
HDMI VIDEO MODE
SELECT ENTER
EXIT
RETURN
• The TV automatically
switches to the HDMI input.
(Turn on the TV
beforehand.)
• Turn off the TV.
EN
ES
16:9
480i
31