JVC CU-VD50U Manual De Instrucciones página 36

CONNECTION SETTING
COMPONENT OUTPUT
For specifying the output resolution setting of the component connectors. You can
also specify the setting using the remote control. (P. 33)
480i
480p
720p
1080i
HDMI SETTING
HDMI VIDEO MODE
Specify this setting when you are using the burner with both the HDMI terminal
and component connectors connected.
ON
OFF
HDMI OUTPUT
For specifying the output resolution setting of the HDMI terminal. You can also
specify the setting using the remote control. (P. 33)
AUTO
480p
720p
1080i
1080p
24p OUTPUT
JVC camcorders do not support 1080/24p recording. (As of May 2008.)
Specify this setting when viewing video images recorded by other devices in
1080/24p on a TV that supports 1080/24p via HDMI connection.
AUTO
OFF
x.v.Color
Specify this setting when viewing video images recorded in x.v.Color on a TV that
supports x.v.Color. This enhances viewing through reproducing colors closely to
their natural colors.
AUTO
OFF
36
During output in D1 (480i)
During output in D2 (480p)
During output in D3 (1080i)
During output in D4 (720p)
Outputs with priority given to the HDMI terminal.
Outputs with priority given to the component connectors.
Set to this value under normal circumstances.
During output in D2 (480p)
During output in D3 (1080i)
During output in D4 (720p)
During output in D5 (1080p) (P. 12)
Select this value to output the images in 1080/24p to a TV that
supports 1080/24p. Set to "OFF" if the images cannot be
played back properly.
Set to this value under normal circumstances.
Set to this value under normal circumstances.
Set to this value when the video images are distorted or when
the colors are not correctly reproduced.