Inserting The Accessories; Inserting The Belt Clip; Inserting The Headphones And The Microphone; Inserting The Battery - Heider Pro5 Manual Del Usuario

INSERTING THE ACCESSORIES

INSERTING THE BELT CLIP

If there is a need to use the belt clip, attach it behind the battery
shown in image 1.
Warning!
Do not use adhesives to support the screw while inserting the belt clip.
The acrylic acid in adhesives can damage the battery panel.
INSERTING THE EARPHONES AND THE MICROPHONE
Insert the inputs of the earphones and the microphone to the SP.
&MIC. Socket shown in image 2.

INSERTING THE BATTERY

Operating the radio repatedly over time will absolutely lower the performance of
the lithium ion batteries chargeable up to 400 times with high performance capacity
expires. If you are using an old battery, it is recommended to replace it with a new one.
The battery can be inserted easily.
1. After adjusting the battery cover to the position of
"unlock", slide down the battery cover downwards
to remove it.
2. Place the battery in the battery slot.
3. Insert back the battery cover in its place and slide
the latch to the position of "lock".
HEIDER PRO5 PMR 446
Image 1
Image 2
Lock
Unlock
English 7