Instructions Of Use - Technoflex VIFOM Manual De Instrucciones/Lista De Recambios

1B
OPERATION
1.8 Instructions of Use for The Electric Machines VIFOM Type
To start up the machine for the first time:
1.- Make sure the extention arm has been assembled correctly.
2.- Make sure the cable is in perfect conditions. If it shows any sign of deterioration, IT SHOULD BE
REPLACED.
3.- Make sure the start button Pos. 1 found on top of the motor's junction box is on "0"
(See Fig. 1.8-1).
4.- Making sure the voltage is the same as that specified on the motor nameplate, connect the
electric cable to the power supply.
5.- Put the button Pos. 1 on "I", and the machine is ready to be used.
6.- Once the job has been finished, and to then stop the machine, the button Pos. 1 should be put on
"0".
1.8.1 Instructions of Use for The Petrol Machines
VIFOK and VIFOH Types
st
1 .- Make sure the extention arm has been assembled correctly.
nd
2 .- Fill the fuel tank with MIXED OR UNLEADED PETROL DEPENDING ON THE VERSION.
rd
3 .- To start, run and stop the machine, carefully read the instructions provided by the motor's
manufacturer included in this manual.
1B-7
Fig. 1.8-1
ENGLISH