Before Initial Use; General Use - Profi Care PC-GB 3021 Manual De Instrucciones

Cepillo alisador
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Notes on Use
Use the appliance only for dry, combed hair.
Ionizing Function – Reduction of Static in Hair
The anti-static effect allows easier hair styling. The hair
does not dry out, it becomes smooth and sparkling.
Electrical Connection
You can connect the appliance to an outlet with a voltage
from 110 V~ to 240 V~.

Before Initial Use

1. Remove the appliance from its packaging.
2. Check the appliance for any transport damage to pre-
vent a hazard.
NOTE:
• There may still be dust or production residues on the
surface of the appliance. We recommend to clean the
appliance as described under "Cleaning".
• When the appliance is switched on for the first time
there may be a slight smell. You should therefore oper-
ate the appliance for approximately 10 minutes without
smoothing your hair. Ensuring sufficient ventilation!
WARNING:
• Before cleaning remove the mains lead from the socket.
• Under no circumstances should you immerse the appliance in
water for cleaning purposes. Otherwise this might result in an
electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Remove hair from the bristles. If necessary, use a comb.
• Clean the surface of the appliance with a slightly damp
cloth.
• Wait until the appliance is completely dry before using it.
PC-GB3021_IM
1. Fully unwind the mains cable.
2. Insert the plug in a duly installed socket.
3. Press the button
control lamp lights up.
NOTE:
The heating time is approximately 10 minutes.
1. Hold one strand of hair tight.
2. Hold the brush so that the
bristles point away from the
scalp.
3. Guide the brush slowly
through the strand of hair. Al-
ways begin at the base of the
hair and move the appliance
in the direction of the hair tip.
4. Repeat the process for one
strand at a time.
Stop Operation
1. Press the button . The power control lamp will go out.
2. Remove the mains plug.
3. Leave the appliance to cool before putting it away!
Therefore place the appliance onto a heat-resistant,
level surface.
Cleaning
• The mains cable should only be wound up loosely.
Never tie the cable tightly round the appliance, as over
time this may result in the cable breaking. Check the
mains cable regularly for damage.
• Hang the appliance up by the suspension eye.
• We recommend that the appliance is kept in its original
packaging if you do not intend to use it for long periods.
• Always store the appliance out of the reach of children,
in a well-ventilated and dry place.
Commissioning
to turn the appliance on. The power

General Use

Storage
31.01.18
25

Publicidad

Tabla de contenido
loading

Tabla de contenido