Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CALIBRATION
Is not necessary to calibrate the equipment before to first use, however you must to calibrate it
after to change the tip or the thermal element.
1. Turn the knob to medium temperature.
2. Measure the temperature of the tip with a thermocouple.
3. Connect the power cord into an outlet. Then, set in
I
to turn on the station.
4. Enter a millimeter screwdriver into the calibration input and turn it (right or left) for adjust the
medium temperature.
17
Publicidad
Tabla de contenido
