Maintenance And Cleaning - Steren CAU-265 Manual De Instrucciones

MAINTENANCE AND CLEANING

• The high temperatures may damage the tip, use the low temperature.
• Clean the tips with the sponge, since can to form oxides and waste.
• Adjust the knob in 250 °C (482 °F) and wait until the temperature is established to can clean
the tip.
• If there are black oxide in the tip, apply new soldering and rub it with a clean sponge. Then,
cover the tip with new soldering.
• If the tip is deformed or eroded, replace by a new one.
Disarm the soldering to replace the tip or the thermal element
Tip
Soldering handle with the
Retention nut Spring
thermal element
Thermal element connector
Cap
Base nut
18